Stainless Steel Shots are widely used for deburring and brightening of the surface of aluminium alloy, zinc alloy, colorful metal and stainless steel, etc. They are of austenite structure with excellent features of high strength and tough, low consumption, none dust, quick clean speed and good clean results. They can extend fatigue life, enhance corrosion- resisting and brighten the surface of parts.
Packing: 25kg plastic woven bag 1000kg Jumbo bag
| Physical & Chemical typical value | |
| C | 0. 15-0.20% |
| Si | 1.5-2.5% |
| Mn | 0.9- 1.2% |
| Ni | 7.0- 10.0% |
| Cr | 16-20% |
| Density | 7.51 g/cm3 |
| Hardness | HV-250 before using；
HV-450 after status |
| Size Distribution | |||||||||||||||||||
| No. | 3.15 | 2.5 | 2.0 | 1.8 | 1.7 | 1.6 | 1.4 | 1.25 | 1.18 | 1.0 | 0.8 | 0.7 | 0.6 | 0.5 | 0.4 | 0.3 | 0.2 | 0.14 | 0.08 |
| S10 | 5%
max |
||||||||||||||||||
| S20 | 5%
max |
90%
min |
|||||||||||||||||
| S30 | 5%
max |
90%
min |
|||||||||||||||||
| S40 | 5%
max |
90%
min |
|||||||||||||||||
| S50 | 5%
max |
90%
min |
|||||||||||||||||
| S60 | 5%
max |
90%
min |
|||||||||||||||||
| S100 | 5%
max |
90%
min |
|||||||||||||||||
| S150 | 5%
max |
90%
min |
|||||||||||||||||
| S200 | 5%
max |
90%
min |
|||||||||||||||||
| S300 | 5%
max |
90%
min |
|||||||||||||||||
| 3.15 | 2.5 | 2.0 | 1.8 | 1.7 | 1.6 | 1.4 | 1.25 | 1.18 | 1.0 | 0.8 | 0.7 | 0.6 | 0.5 | 0.4 | 0.3 | 0.2 | 0.14 | 0.08 | |
