Vacuum closed circuit pressure blast machine consists of pressure blast machine with remote control, blast hose, blast head assembly, reclaimer and vacuum pump recovery system, dust collector and cart. it is widely used for descaling, surface texturing, and paint preparation, mainly used to clean bigger components, like steel structure, bridge, big tank body, used for big tanks vessel repair, pipe rust removing at oil field, container renew, etc, and vacuum pump generated recovery system makes it to be used without dust and disposal problem.
Features:
- Automaticallyrecoverand recycle the abrasive, reduce the abrasive consumption, eliminate sweeping and minimize abrasive disposal costs.
- 2. Powerfulvacuumpump fitted for recovery to reduce the air consumption, easy load new or reusable abrasive media, and easy recovery expendable abrasive media for disposal.
- Adoptpressure-holdpneumatic remote control, keeping the blast machine under pressure but allow the operator to start and stop blasting as frequently as needed. The machine is pressurized and depressurized manually, and the remote control handle controls the on/off of the abrasive and air independently.
- 4. Closedcircuitblast gun fitted with boron carbide nozzle dia. 6.4mm, 7.9mm to customers require.
- 5. Cartridgefilterdust collector, manually dust cleaning.
- 6. Itcanbe used as a normal portable pressure sand blasting machine only or a vacuum recovery.
- 7. Availablewith4 standard different brush, flat brush, cylindrical brush, interior angle brush, exterior angle brush.
Model: ERB-YII
Compressed air source: 0.4 ~ 0.7 Mpa,
Air consumption: 3~6 m3/min
Vacuum pump:7.5KW
Pressure vessel diameter: 700mm
Pressure vessel capacity: 400 liters approx
Loading capacity: 350-700kg
Blasting capacity: 15~25m2/h,
Blast cleaning: SA 2.5 ~ SA 3.0
Working area Radius: 10-20m ( SG40- 10m)
Applicable media: SG40, BFA #16-24#.
Recommend media: 1.5mm max.
Dust recovery: 100%
Dimension: L2000xW900xH2370mm
Weight: 500kg
Shenzhen Kaitexin Industry Co., Ltd.
Vacuum Closed Circuit Suction Blast Machine
Vacuum closed circuit suction blast machine consists of suction blast machine with remote control, blast hose, blast head assembly, reclaimer & separator and pneumaticlly generated abrasive recovery system, dust collector and cart. it is widely used for descaling, surface texturing, and paint preparation, mainly used to clean rust removing at oil field, container renew, etc, and pneumaticLly generated abrasive recovery system makes it to be used without dust and disposal problem.
Features:
- automaticallyrecoverand recycle the abrasive without stopping to refill, reduce the abrasive consumption, eliminate sweeping and minimize abrasive disposal costs.
- 2. pneumaticllygeneratedabrasive recovery system for easy loading new or resuable abrasive media, and easy recovery expendable abrasive media for disposal. Spent abrasive dust and debris is recovered continuously and re-useable abrasive is recycled to the gun.
- 3. adoptsuctionblast system allow the operator to start and stop blasting as frequently as needed.
- 4. closedcircuitblast gun fitted with boron carbide nozzle dia4mm, 7.9mm, 9.5mm, 11. 1mm to customers require.
5.Integral dust collector houses caritridge filter to trap dust and fines for acceptable dust emission.
- 6. Itcanbe used as a normal portable suction sand blasting machine only or a vacuum recovery only.
- availablewithdifferent brushes.
| Model | ERB-X | ERB-XI |
| Operating pressure | 0.3 ~ 0.7 MPa | 0.3 ~ 0.7 MPa |
| Air consumption | 2 – 3 m3/min | 2 – 3 m3/min |
| Power consumption | Compressed air and electricity | Compressed air only |
| Vacuum | 16.7KPa | —- |
| Vacuum pump | 160m3/h, 3.0kw | —- |
| Abrasive storage hopper | 80 liters Approx | 60 liters Approx |
| Operting hose length | 5 meter max | 5 meter max |
| Blast cleaning | Sa2.5-Sa3.0 | Sa2.5-Sa3.0 |
| Process capacity | 2-3m2/h | 2-3m2/h |
| Blast cycle | Continuous | Continuous |
| Recommend media | Artificial corundum, garnet, plastic blast media size: 1.4mm max. | |
